Last Modified: 11-29-2007 1.6 G
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000002FJX004X
Title: DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: INSPECTION (2008 Sequoia)

INSPECTION

1. INSPECT POWER BACK DOOR MAIN SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

6 (MSE) - 9 (MSW)

Free

Below 1 Ω

6 (MSE) - 9 (MSW)

Pushed

10 kΩ or higher

If the result is not as specified, replace the power back door main switch.

(b) Check the illumination operation.

(1) Connect the positive (+) battery lead to terminal 8 (ILL+) and the negative (-) battery lead to terminal 7 (ILL-), then check that the illumination illuminates.

OK:

Illumination illuminates.

If the result is not as specified, replace the power back door main switch.